, , , , , , , , , , , , , , ,

Double Sided 3M Sticky / Adhesive Pads (10 Pack) for GoPro Hero. 4 x Flat, 6 x Curved.

£6.99

Out of stock

The Perfect Accessory For Gopro Filming!

Capture all the excitement on the move with this great accessory for your action camera.

This 3M VHB Adhesive mount kit is great as spares or replacements ready for when you need to mount your GoPro to other accessories such as helmet, surf board, etc. The bundle includes adhesive pads, both flat and curved, utilising 3M VHB technology. With this great bundle nothing is off limits when it comes to mounting your GoPro.

Contents

  • 6 x 3M VHB Adhesive Pads (for curved mounts)
  • 4 x 3M VHB Adhesive Pads (for flat mounts)

How to Apply for the best Results

  • 1. Press the Mounts firmly in place over the entire surface. Be sure to apply at room temperature, and also allow at least 24 hours for maximum fixation to adhere well to the surface.
  • 2. Always apply to smooth and Clean surfaces. Textured surfaces will not provide an adequate bond
  • 3. You can use a hairdryer or heat gun to soften the adhesive. This will ensure a good bond. Cold weather significantly reduces the contact bond.
  • To apply 3M adhesive tape follow these steps: Apply the tape to the mount than apply the mount to a smooth and clean surface. A textured surface or any imperfections to a smooth surface can keep the adhesive from making a strong bond. Firmly press the mount into place ensuring full contact over the entire surface area. Be sure to apply the mount at room temp, and also ideally allow at least 24 hours for the mount to properly adhere to the surface.. To remove the adhesive mounts, you can use a hairdryer or heat gun to soften the adhesive and slowly peel it back. Please note that you will not be able to reuse the tape once you remove it.. When using surf boards and the surf mount, don’t mount to soft-top boards as they are porous and the mount will not adhere properly, if you do decide to mount at your risk, also use a secondary adhesive tether to secure

Compatibility With GoPro 12, 11,10, 9, 8, 7, 6, 5, 4, 3, 2, Session etc,  DJI Osmo Action, Xiaomi Yi, SJ Cam,  Apex Cam,  Apeman, Akaso,  Kitvision,  Garmin VIRB 360 ULTRA 30 VIRB XE VIRB X and all Action Cameras that use the Gopro Mounting system

Weight 0.1102311310000 g
Dimensions 2.30 × 1.60 × 1.20 cm
Shopping Basket
Scroll to Top